The MultiTest-dV is a superior motorised force tester offering outstanding value. Designed for precision-controlled compression and tension testing the MultiTest-dV’s simple controls, backed by sophisticated electronics, make it the ideal choice for basic materials testing.
Simply fit a dedicated ELS loadcell and connect up to VectorPro MT software to use your MultiTest-dV as an entry-level materials tester.
Use the power of VectorPro MT software to control your whole test sequence with simple, step-by-step programmes. Perform both standard calculations like peak, load at displacement and more complex calculations such as Youngs Modulus, and offset yield strength.
Tension & Compression
ension & Compression
Available loadcells (all measure from zero to the value indicated in the table below)
| Model |
ELS
2 |
ELS
5 |
ELS
10 |
ELS
25 |
ELS
50 |
ELS
100 |
ELS
250 |
ELS
500 |
| N |
2 |
5 |
10 |
25 |
50 |
100 |
250 |
500 |
| lbf |
0.44 |
1.1 |
2.2 |
5.5 |
11 |
22 |
55 |
110 |
| kgf |
0.2 |
0.5 |
1 |
2.5 |
5 |
10 |
25 |
50 |
| Model |
ELS-S
100 |
ELS-S
200 |
ELS-S
500 |
ELS-S
1000 |
ELS-S
2500 |
| N |
100 |
200 |
500 |
1000 |
2500 |
| lbf |
22 |
44 |
110 |
220 |
550 |
| kgf |
10 |
20 |
50 |
100 |
250 |
Accuracy
± 0.5% of reading from 5-100% of the loadcell capacity. eg ELS 100 when measuring 10N is accurate to ± 0.05 N or when measuring 50N it is accurate to ± 0.25 N.
Resolution
1:25,000
Units of measurement
mN, daN, N, kN, gf, kgf, ozf, lbf
Sampling rate
20 kHz
Data-acquisition rate
500 Hz
Dimensions
Dimensions
Headroom (vertical space to fit sample)
1205 mm (0.5kN), 1005 mm (1kN), 526 mm (2.5kN)
47″ (0.5kN), 40″ (1kN), 21″ (2.5kN)
Throat depth (column to centre-line of gauge)
70.5 mm (2.6″)
Height
1616 mm (0.5kN), 1416 mm (1kN), 941 mm (2.5kN)
64″ (0.5kN), 56″ (1kN), 37″ (2.5kN)
Width
290 mm (11.4″) (0.5kN to 2.5kN models)
11.4″Â (0.5kN to 2.5kN models)
Depth
414 mm (16.3″) (0.5kN to 2.5kN models)
Weight
31 kg (68 lbs), 0.5kN; 27.5 kg (61 lbs), 1kN; 24 kg (53 lbs), 2.5kN
